Modular tabletop organizer in PETG
image
A six-bin modular tabletop organizer printed in three sessions on the Prusa MK4. Translucent blue PETG was specifically chosen so you can see the contents at a glance without opening anything.
Each module is a 70 × 70 × 40 mm box with a sliding lid. The base plate has a 70 mm grid of dovetail joints; modules snap in any orientation. Total print time: ~26 hours across nine parts.
Settings: 0.2 mm layers, 4 walls, 25% gyroid infill. No supports. First two layers at 95% scale to compensate for the slightly proud texture of the PEI plate.