Hands-on 3D printing publication.https://3dpfi.com/en-ushttps://3dpfi.com/articles/bambu-x1c-vs-voron-2-4/https://3dpfi.com/articles/bambu-x1c-vs-voron-2-4/A controlled comparison across PLA, PETG, and ASA — print quality, reliability, noise, and what surprised us about the closed ecosystem after half a year of daily use.Tue, 12 May 2026 00:00:00 GMTcomparisonlong-readAlex Reyeshttps://3dpfi.com/articles/annealing-petg-what-works/https://3dpfi.com/articles/annealing-petg-what-works/Five oven schedules, two filament brands, dimensional measurements before and after. Most internet advice on this is wrong; here's what isn't.Sat, 09 May 2026 00:00:00 GMTmaterialspost-processingMaya Tonghttps://3dpfi.com/articles/first-layer-adhesion-deep-dive/https://3dpfi.com/articles/first-layer-adhesion-deep-dive/Cause-and-effect, not folklore. We walk through every variable that affects whether your part stays put, in order of how often each one is actually the culprit.Thu, 07 May 2026 00:00:00 GMTtechniquetroubleshootingSam Okafor